JUKI LK-1901AN Instruction Manual page 31

(2) Sewing operation
Operation example : Perform sewing with the contents of the registered C.
h
d
h
⇔
) Turn ON the power switch.
2) Set the pattern No. to "C- " using the
key. Scroll as follows :
/ 0 to 200 ,/ P1 to P50 ,/ C1 to C20 ,
3) Press the
up, the work clamp feet will go up after having
moved.
4) If the contour of the pattern is acceptable, the
sewing can be made.
5) Every time the sewing is finished, the step is made
in the order of the combination. After completing
one cycle of sewing, the step returns to the first
step. The sewing can be made repeatedly.
/ "C1. 1" / "C1. 2" / "C1. 3"
* When you desire to return the pattern to the pre-
vious one or skip the next pattern after sewing,
press or
ing LED lights up. The indication of the pattern
will change, and the work clamp feet will move to
the sewing start point.
* If the contents of P to P50 are changed after reg-
istration of C to C20, the contents of P to P50
used in C to C20 will change. So, be careful.
* Make sure of the contour of the pattern for each
of the patterns. (Refer to the item
Checking the contour of a sewing pattern"
p.19.)
28
－ －
key. When the sewing LED lights
key in a state that the sew-
"! .[5]-2.
or