Table of Contents
Advertisement
(2) Sewing operation
Operation example : After performing sewing with the contents of the registered P2, perform sewing with
h
h
⇔
d
h
h
⇔
d
the contents of P3.
) Turn ON the power switch.
2) Press the
3) Press the
lights up, the work clamp foot goes up after it has
moved.
4) Check the contour of the sewing pattern.
(Refer to the item
tour of a sewing pattern" p.19.)
5) If the contour of the sewing pattern is acceptable,
the sewing can be made.
6) Press
key after completion of sewing and
the presser comes down. The presser moves to
the sewing start point after origin retrieval and
goes up. (The P keys can operate the pattern
chage by one-touch even when the sewing LED
is lighting up.)
7) Perform the above items 4) and 5).
* The P to P25 can be indicated on the display
when selecting the pattern by pressing the
or
key.
/ 0 to 200 ,/ P1 to 25 ,
P to P25 which have not been registered are not
indicated.
Press P1 to P25 key while the sewing
LED lights up and the presser comes
down. Be careful that your fingers are
not caught in the presser.
Pattern register from P26 to P50 can be
performed. Register can not be performed
in
to
by the pattern selection only. Indicate the
pattern with
/ 0 to 200 ,/ P1 to P25 ,/ P26 to P50 ,
Pattern selection from P26 to P50 can-
not be performed while the sewing LED
lights up.
26
－
－
key.
key, and when the sewing LED
"!.[5]-2. Checking the con-
key. Designate the pattern
or
key.
Advertisement
Table of Contents
