JUKI LK-1901AN Instruction Manual page 43

4) Indicate "000" with
value returns to the initial value at the time of
delivery from the factory with
Press key to cancel the operation here
and return to the state of step 2).
5) Press key. The sewing LED goes off
and the set value of the first stitch is registered.
6) Indicate memory switch No. 3 with
key.
Here, set the sewing speed of the second stitch.
7) Press key The sewing LED lights up and
the set value of the second stitch is indicated.
8) Indicate "2000" with
The value returns to the initial value at the
time of delivery from the factory with
Press key to cancel the operation here
and return to the state of step 6).
9) Press key. The sewing LED goes off
and the set value of the second stitch is regis-
tered.
0) Press key. The memory switch setting mode is finalized and the mode returns to the normal mode.
(3) Setting whether the calling of pattern data is operative or not
By making inoperative the calling of the unnecessary pattern, this setting prevents the different pattern
from calling by mistake.
Also, it is possible to call and use the necessary pattern.
Setting example : Make the calling of pattern Nos. 2 and 3 inoperative.
) Press key in the state that the sewing
LED is put out.
2) Indicate memory switch No. 20 with
key.
or key. The
e
key.
e
or
e
e
or key.
e
key.
e
e
or
e
40
－ －