Installing The Motor Cover; Managing The Cord - JUKI AMS-210EN/IP-420 Instruction Manual

3-12. Installing the motor cover

3-13. Managing the cord

1) Fix the cords with cords setting plate 1 in the state that the cords are slack to such an extent that
stress is not applied to the cords even when the machine head is tilted as shown in the figure.
Install motor cover 1 on the machine main unit
with screws supplied with the machine as acces-
1
sories.
1
2) Secure the cable to be put into the POWER
BOX with an internal cable clip 2 .
2
– 13 –
Slack