Checking A Preview Image Of A Copy (Preview) - Sharp MX-M753 Operation Manual

CHECKING A PREVIEW IMAGE OF A COPY
(Preview)
You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview
image of the copy in the touch panel before printing the copy.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Exposure
Auto
2
Copy Ratio Original
100%
Select copy settings and press the [START] key.
3
After the original is scanned, a preview image of the copy appears in the touch panel. The copy is not printed until the [Start
Copy] key is touched in the preview screen.
Preview
4
0001
If you need to change the copy settings, touch the [Reset] key.
To cancel copying...
Press the [STOP] key (
Special Modes
2-Sided Copy
Output
File
Quick File
Paper Select
Auto Auto
8½x11
8½x11 Preview
Plain
Reset
Display Output
Function Rev.
Display Rotation
Start Copy
/0010
).
Touch the [Preview] key so that it is
highlighted.
Check the preview image and then touch
the [Start Copy] key.
Copy printing begins.
For details on the preview screen, see
(page 2-131).
2-129
COPIER
"PREVIEW SCREEN"
Contents