Transmitting Metadata - Sharp MX-M753 Operation Manual

TRANSMITTING METADATA

When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the
procedure below.
Follow the steps below to select a metadata set, enter each item, and perform metadata transmission.
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
Send Settings Resolution
Address Review File Format
Color Mode
File
1
Special Modes
Quick File
Preview
• If no metadata sets have been stored, the [Data Entry] tab cannot be selected. Store a metadata set in the Web
pages and then perform the transmission procedure.
• If a specific metadata set has been specified as the default set, go to step 3.
Metadata Set
Set Name:Metadata 1
Metadata 1
2
Metadata 3
Metadata 5
Metadata 7
Metadata 9
(1)
Fax Data Entry
8½x11
Scan: Auto Send: Auto
Auto Text
200X200dpi
PDF PDF
Mono2
Metadata Entry
(2)
(1) (2)
Cancel OK
Metadata 2
Metadata 4
Metadata 6
Metadata 8
Metadata 10
Switch to data entry mode and display
the metadata set screen.
(1) Touch the [Data Entry] tab.
(2) Touch the [Metadata Entry] key.
Select a metadata set.
(1) Touch the key of the metadata set that you
wish to use.
(2) Touch the [OK] key.
5-129
SCANNER/INTERNET FAX
Contents