Changing The Port - Sharp MX-M753 Operation Manual

CHANGING THE PORT

When using the machine in a Windows environment, follow the steps below to change the port when you have changed
the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If
the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see
Port" (page 1-107) for the remaining steps of the procedure to change the port.
Click the [Start] button (
• In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes].
• In Windows 2000, click the [Start] button, select [Settings], and then click [Printers].
1
If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel],
click [Printers and Other Hardware], and then click [Printers and Faxes].
Open the printer properties window.
2
(1) Right-click the printer driver icon of the machine.
(2) Select [Properties].
3
(2)
To change to a previously created port such as USB port, select the desired port (USB001, etc.) from the list and click
the [Apply] button. This changes the port.
), click [Control Panel], and then click [Printer].
Adding or changing a port.
(1) Click the [Ports] tab.
(2) Click the [Add Port] button.
(1)
1-105
BEFORE USING THE MACHINE
"Changing to a Standard TCP/IP
Contents