Sharp MX-M753 Operation Manual page 148

 Changing to a Standard TCP/IP Port
If the machine is being used on an IPv6 network, change the port to a port created using the operating system's
"Standard TCP/IP Port".
Follow steps 1 to 3 of
1
2
Click the [Next] button.
3
4
5
"CHANGING THE PORT" (page 1-105).
Select [Standard TCP/IP Port] and then
click the [New Port] button.
Enter the machine's IPv6 address in
[Printer Name or IP Address] and click
the [Next] button.
Select [Custom] and click the [Settings]
button.
1-107
BEFORE USING THE MACHINE
Contents