Setup In A Macintosh Environment; Mac Os X; Mac Os 9.0 - 9.2.2 - Sharp MX-M753 Operation Manual

SETUP IN A MACINTOSH ENVIRONMENT

This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer
driver settings.
☞
MAC OS X: this page
(v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.8. v10.6)
☞
MAC OS 9.0 - 9.2.2: page 1-115
• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In addition, the machine
must be connected to a network. A USB connection cannot be used.
• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.

MAC OS X

The explanations of screens and procedures are primarily for Mac OS X v10.4. The screens may vary in other versions of the
operating system.
Insert the "Software CD-ROM" into your computer's CD-ROM drive.
1
Insert the "Software CD-ROM" that shows "Disc 2" on the front of the CD-ROM.
Double-click the [CD-ROM] icon ( ) on the desktop.
2
Double-click the [MacOSX] folder.
3
Before installing the software, be sure to read "ReadMe First". "ReadMe First" is in the [US-English] folder ([English] folder in
areas other than the U.S.) in the [Readme] folder.
Double-click the folder corresponding to the versions of the operating system.
4
Double-click the [MX-PKX] icon (
5
If the "Authenticate" window appears in Mac OS X v10.2.8, enter the password and click the [OK] button.
6
BEFORE USING THE MACHINE
).
Click the [Continue] button.
1-109
Contents