Set The Paper Type; Tray Settings For Tray 1 To 4; Loading Paper In Paper Tray 1 - Tray 2 - Sharp MX-M753 Operation Manual

TRAY SETTINGS FOR TRAY 1 TO 4

LOADING PAPER IN PAPER TRAY 1 - TRAY 2

8-1/2" x 11" or A4 size paper can be loaded in tray 1 and tray 2. These are parallel large-capacity trays that allow a total
of approximately 2000 sheets of SHARP standard paper (20lbs. (80g/m
size of tray 1 or tray 2, see
1
2
3

Set the paper type.

If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was
4
changed, be sure to change the appropriate settings as explained in
Settings.
"CHANGING THE PAPER SIZE IN PAPER TRAY 1 - TRAY
Indicator line
Indicator line
BEFORE USING THE MACHINE
2
)) to be loaded. If you wish to change the paper
Pull out paper tray 1-tray 2.
Gently pull the tray out until it stops.
Load paper in the left and right trays.
Lift the paper guide and load paper in tray 1.*
Approximately 800 sheets of SHARP standard paper
2
(20lbs.(80g/m )) can be loaded.
Be sure to return the paper guide to its original position after
loading the paper.
Lift the paper guide and load paper in tray 2.*
Approximately 1200 sheets of SHARP standard paper (20lbs.
2
(80g/m )) can be loaded.
*1 The paper stack must not be higher than the indicator line.
Gently push tray 1-tray 2 into the
machine.
Push the tray firmly all the way into the machine.
"Paper Tray Settings" (page 7-13) in the System
1-30
2" on the next page.
1
1
Contents