Sharp MX-M753 Operation Manual page 95

7
Make a test print or copy in the staple sort mode to verify that stapling is performed properly.
Replacing the cartridge in the saddle stitch finisher
Only when the saddle stitch finisher (MX-FN16) is installed.
1
2
3
4
(2)
(1)
BEFORE USING THE MACHINE
Close the front cover of the finisher.
Open the lower cover of the saddle
stitch finisher.
When an optional inserter is installed, open the front cover of
the inserter before opening the lower cover of the finisher.
Slide out the saddle stitch unit carefully
toward the front.
(1) Grasp the grip of the saddle staple
holder and pull it out.
(2) While still grasping the grip, rotate
the saddle staple holder 90° in the
direction of the arrow (rotate to the
right).
Remove the empty staple case and set a
new one.
Replace both staple cases with new ones. Remove the cover
from the staple cartridge and then install the cartridge.
1-54
Contents