Sharp MX-M753 Operation Manual page 833

(13) Paper misfeed in the large capacity tray
(14) Paper misfeed in the saddle stitch
finisher (bottom)
Close the bypass tray.
Open the top cover of tray
5.
Open the top cover and
remove the misfed paper.
After removing the misfed
paper, close the top cover.
Open the front cover of the
inserter (only when an
inserter is installed).
Open the lower cover of the
saddle stitch finisher.
Open the entrance cover of
the saddle stitch unit.
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
8-14
TROUBLESHOOTING
Close the entrance cover of
the saddle stitch unit.
Turn the right-hand knob
counter clockwise. Then,
push the left-hand knob
and turn it clockwise.
Remove any paper misfed
on the exit side of the
saddle stitch unit.
Be careful not to tear the
misfed paper during
removal.
Open the exit cover of the
saddle stitch unit and
remove any misfed paper.
Be careful not to tear the
misfed paper during
removal.
Close the exit cover of the
saddle stitch unit.
Contents
1
2