Sharp MX-M753 Operation Manual page 831

(7) Paper misfeed in the bypass tray
(8) Paper misfeed in the bypass tray (side)
(9) Paper misfeed in tray 3 and tray 4 (side)
A misfeed may occur inside the compartment, so
please check the entire compartment carefully.
Remove the misfed paper
from the bypass tray.
Be careful not to tear the
misfed paper during
removal.
Open the side cover and
remove the misfeed.
Open the lower cover on the
left side of the machine.
Grasp the finger hold and
gently open the unit.
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
(10) Paper misfeed in tray 1 to tray 4 (in the
tray)
Roller rotating knob A
A misfeed may occur inside the compartment, so
please check the entire compartment carefully.
If paper is misfed in tray 1 (left-side tray)...
If paper is misfed in tray 2 (right-side tray)...
8-12
TROUBLESHOOTING
Remove the misfed paper.
Turn roller rotating knob A in
the direction of the arrow to
remove the misfed paper.
If misfed paper is not found
in the previous step's
illustration, pull out paper
tray 1 - tray 2 and remove
the misfed paper.
Grasp the finger hold and
gently open the unit.
Pull the tray all the way out
until it stops.
Lift the paper guide and
remove the misfed paper.
Be sure to replace the paper
guide in its original position
after removing the paper.
When using tray 2, bypass
tray or large capacity tray,
check the paper transfer
unit inside the tray and
remove any misfed paper.
Contents