Setup In A Macintosh Environment; Mac Os X; Mac Os 9.0 - 9.2.2 - Sharp MX-M753U Operation Manual

SETUP IN A MACINTOSH ENVIRONMENT

This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer
driver settings.
☞
MAC OS X: this page
(v10.2.8, v10.3.9, v10.4.11, v10.5 - 10.5.8. v10.6)
☞
MAC OS 9.0 - 9.2.2: page 1-115
• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In addition, the machine
must be connected to a network. A USB connection cannot be used.
• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.

MAC OS X

• The explanations of screens and procedures are primarily for Mac OS X v10.4. The screens may vary in other versions of
the operating system.
• The CD-ROM does not include software for Mac OS X10.2.8 and X10.3.9. Contact your dealer or nearest authorised
service representative if you want software for X10.2.8 and X10.3.9.
Insert the "Software CD-ROM" into your computer's CD-ROM drive.
1
Insert the "Software CD-ROM" that shows "Disc 1" on the front of the CD-ROM.
Double-click the [CD-ROM] icon ( ) on the desktop.
2
Double-click the [MacOSX] folder.
3
Before installing the software, be sure to read "ReadMe First". "ReadMe First" is in the [English] folder in the [Readme] folder.
Double-click the folder corresponding to the versions of the operating system.
4
Double-click the [MX-PKX] icon (
5
If the "Authenticate" window appears in Mac OS X v10.2.8, enter the password and click the [OK] button.
BEFORE USING THE MACHINE
).
1-109
Contents