Table of Contents
Advertisement
INSTALLATION
3.12
MOUNTING MIRROR KIT
•
Start with lower mirror bracket first.
•
Two cutouts are provided at the top of each up-
right frame, for fitting the mirror lower brackets.
•
The brackets will need to be fitted in the upper
cutout.
•
Insert top end of bracket first, as shown in Figure
3AF.
•
Once top of bracket has been fully inserted, drop
bottom of bracket towards the case upright as
shown in Figure 3AG.
Bracket Insert Here
PAGE 26
•
•
•
•
FIGURE 3AF
FIGURE 3AG
Once lower brackets are fitted, commence fitting
of upper mirror brackets.
Two pairs of holes are provided at the back end
of the ceiling panel. The brackets are to be fitted
to the rear pair of holes in the ceiling panel.
Fasten upper brackets to ceiling panel with the
tek screws provided as shown in Figure 3AH.
Repeat upper bracket fastening for each end of
the mirror as shown in Figure 3AI.
Bracket Insert Here
PSM15E3R SEMI-VERTICAL - HUSSMANN
FIGURE 3AH
FIGURE 3AI
Advertisement
Table of Contents
