Twindos; Ultraphase 1 Dispensing Quantity; Ultraphase 2 Dispensing Quantity; Twindos Maintenance - Miele WWD 660 WCS Operating And Installation Instructions

 TwinDos
You can switch TwinDos on or off. The
Twin Dos White or Twin Dos Color sen-
sor buttons light up dimly when a wash
program is selected or the sensor but-
tons are switched off.
Options
 = TwinDos is switched off

= TwinDos is switched on (fac-
tory default)
 UltraPhase 1 dispensing
quantity
The dispensing quantity is pre-set to
46 ml at the factory (water hardness
level I).
You can adjust the dispensing quantity
using this programmable function.
The set milliliters appear on the time
display. You can use the  sensor but-
ton to increase the dispensing quantity
and the  sensor button to reduce it.
 UltraPhase 2 dispensing
quantity
The dispensing quantity is pre-set to
36 ml at the factory (water hardness
level I).
You can adjust the dispensing quantity
using this programmable function.
The set milliliters appear on the time
display. You can use the  sensor but-
ton to increase the dispensing quantity
and the  sensor button to reduce it.
Programmable functions
 TwinDos maintenance
The washing machine has a cleaning
program for the TwinDos system. Run-
ning the cleaning program will clean
the hoses inside the washing machine.
When the  indicator light lights up
and  appears on the time display, the
washing machine must be cleaned.
Refer to "Cleaning and care – TwinDos
maintenance" for information on how to
perform cleaning.
Options
 = No cleaning (factory default)
 = Compartment  cleaning
 = Compartment  cleaning
 Degree of soiling
The quantity of detergent dispensed
via TwinDos and the quantity of water
required for rinsing depend on factors
including the degree of soiling.
Options
 = Light
 = Normal (factory default)
 = Heavy
85