Sanitize Info(Cleaning The Drum); Cleaning The Water-Inlet Filter - Miele WWD 660 WCS Operating And Installation Instructions

Sanitize info
(Cleaning the drum)
Washing at low temperatures and/or us-
ing liquid detergent can cause bacteria
and unpleasant odors to build up in the
washing machine. Use the Sanitize pro-
gram to clean the washing machine.
Clean the drum no later than the point
at which the  indicator light and  light
up on the time display.

Cleaning the water-inlet filter

The washing machine has 2 filters to
protect the inlet valve. Check these fil-
ters every 6 months or so. Check the fil-
ters more often if there are frequent in-
terruptions to the external water supply.
Cleaning the filter in the inlet hose
 First turn off the faucet.
 Unscrew the inlet hose from the
faucet.
 Remove the rubber seal 1 from the
connector.
 Using needle nose pliers, take hold of
the plastic filter bar 2 and remove the
plastic filter.
 Clean the filter.
Cleaning and care
 Reassemble in reverse order.
Cleaning the filter in the inlet valve
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
 Use needle nose pliers to withdraw
the filter by the bar.
 Clean the filter.
 Reassemble in reverse order.
The filters must be put back in place
after cleaning.
 Screw the screw thread securely
back onto the faucet.
 Turn on the water-supply faucet.
Make sure there is no water leaking
from the screw thread.
Tighten the screw thread.
49