Programmable functions
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the program will be canceled
and the fault message will appear.
If the water pressure cannot be in-
creased, activating this function will
prevent the program from being can-
celed.
Options
= Low water pressure is
switched off (factory setting)
= Low water pressure is
switched on
Chlorine bleach
You can activate the automatic addi-
tion of chlorine bleach at the end of
the main wash.
Chlorine bleach may only be used in
some programs. See "5. Adding deter-
gent – Using chlorine bleach" for more
detailed information.
Activating chlorine bleach extends the
program duration by approximately
10 minutes.
Options
= Chlorine bleach is switched off
(factory setting)
= Chlorine bleach is switched on
84
Display brightness dimmed
The brightness of the dimmed sensor
buttons on the control field can be set
to one of seven different levels.
The brightness will change as soon as a
different setting is chosen.
Options
= Darkest level
= Brightest level
= (factory setting)
Welcome tone
The welcome tone sounds whenever
the washing machine is switched on.
You can switch the welcome tone on or
off.
Options
= Welcome tone is switched off
= Welcome tone is switched on
at normal volume
= Welcome tone is switched on
at loud volume