Commissioning Twindos - Miele WCR890 WPS Operating Instructions Manual

Before using for the first time

5. Commissioning TwinDos


Set up "TwinDos"?
Skip
 Touch the
Continue
TwinDos up straight away.
Tip: To postpone setup until later:
Touch the Skip sensor. The following
message will then appear in the display:

It is possible to set up later in "Settings" /
"TwinDos".
Confirm with OK.
Settings for compartment 
The procedure below describes the pro-
cedure for Miele UltraPhase 1 and Miele
UltraPhase 2. The procedure for other
detergents is similar.
 Agent for comp. 
No agent
Miele
UltraPhase 1
 Touch the
Miele UltraPhase 1
22
sensor to set
Universal Delicates
detergent detergent
Colour Delicates/
detergent Woollens
sensor.
The following message will then appear
in the display:
 Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 is pre-set for  (hard-
ness level II).
Continue
Dosage for comp. 
 Confirm the pre-set value with the OK
sensor, or change the value.
 Hardness level I
 Hardness level II
11:02
 Hardness level III
The following appears in the display:
 Insert container 
OK
62
61
60
ml
59
58
UltraPhase 1
48 ml
60 ml
72 ml
11:02
OK