Miele WWD 660 WCS Operating And Installation Instructions page 38

Program guide
Temperature
with garment care label sym-
bols
Outdoor
Warm+  105°F/40°C
Warm 85°F/30°C
Cold Cold
Proofing
Warm+  105°F/40°C
Drain / Spin
- Drain only: Set spin speed to .
Cold
- Make sure you select the appropriate spin speed.
38
 Performance outerwear (e.g., jackets and
trousers) made from membrane fabric such as

Gore-Tex®, SYMPATEX®, WINDSTOPPER®,
etc.
- Zip up or close any jackets with Velcro before
washing.
- Do not use fabric softener.
- If required, these garments can also be re-
proofed using the Proofing program. Reproof-
ing after each wash cycle is not recom-
mended.
Treating microfiber fabric, ski wear, or table
linens made from mainly synthetic fibers to pro-
vide a finish which is resistant to water and dirt.
- The items should be freshly laundered and
spun or dried before proofing.
- For best results, the items should be heat-
treated afterwards either in a tumble dryer or
by ironing.
Item/Tip
Small load (5.5 lb/2.5 kg)
Small load (5.5 lb/2.5 kg)
Full load (17.6 lb/8 kg)