Miele WWD 660 WCS Operating And Installation Instructions page 57

Hide thumbs Also See for WWD 660 WCS:
Table of Contents

Advertisement

General problems with the washing machine
Problem
Large amounts of deter-
gent residue remain in
the detergent dispens-
ing drawer.
The fabric softener is
not completely dis-
pensed or too much
water remains in the 
compartment.
At the end of the pro-
gram there is still liquid
in the capsule.
There is water next to
the capsule in the fabric
softener compartment
Frequently Asked Questions
Possible cause and solution
The water pressure is too low.
 Clean the filter in the water intake.
 Please note that the water pressure must be at
least 14.5 psi (100 kPa).
Powder detergent used in conjunction with water
softeners tends to become sticky.
 Clean the detergent dispenser drawer and in fu-
ture, add detergent first and then the water soft-
ener.
The siphon tube is either positioned incorrectly or
clogged.
 Clean the siphon tube, see "Cleaning and care -
Cleaning the detergent drawer".
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
 Clean the small pipe.
Not a fault.
For technical reasons, a small amount of water will
remain in the capsule.
The  sensor button was not activated.
 Make sure that you remember to activate the
 sensor button the next time you insert a cap-
sule.
An empty capsule was not removed at the end of the
last wash program.
 Remove and then dispose of the empty capsule at
the end of each wash cycle.
The small pipe in the detergent dispenser drawer
onto which the capsule is placed is blocked.
 Clean the small pipe.
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wwd 660

Table of Contents