Starting The Calibration Program - Miele WWD 660 WCS Operating And Installation Instructions

Before using for the first time
4. Starting the calibration pro-
gram
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Normal program must
be run without laundry and without de-
tergent.
 Turn on the faucet.
 Turn the program selector to the Nor-
mal position.
The washing machine is now switched
on and the temperature Warm+ and
spin speed Max light up.
 Touch the Start/Add laundry sensor
button.
The wash program will start.
After 15 minutes, the indicators dim.
18
Opening the door at the end of the
program
The door remains locked during the
Anti-crease phase. The control field
lights up for the first 10 minutes. The
control field then goes out and
the Start/Add laundry sensor button
flashes.
 Turn the program selector to the
 position.
 appears on the time display and the
 indicator light goes out.
The door will be unlocked.
Tip: After the Anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field is completely dark.
 Take hold of the door and pull it
open.
Tip: Leave the door slightly open to al-
low the drum to dry.
The appliance is now ready for use.