1. The Twin Dos White sensor control
will flash at the start of the program
to indicate that the cartridge for com-
partment 1 is empty.
2. The Twin Dos Color sensor control
will flash at the start of the program
to indicate that the cartridge for com-
partment 2 is empty.
Preparing the cartridge
Remove the cover cap from the car-
tridge.
or
Remove the film seal from the car-
tridge completely.
Replacing the TwinDos cartridge
Risk of damage from film seal
If the film seal is not removed com-
pletely, leaks can occur in the Twin-
Dos system.
Remove the film seal from the suc-
tion port on the cartridge completely
before inserting the new cartridge.
Replacing the cartridge
Switch on the washing machine.
To release the lock, press the yellow
button above the cartridge.
Remove the cartridge.
Insert a new cartridge.
Touch the flashing sensor control.
The counter is set to 0.
43