Miele WWD 660 WCS Operating And Installation Instructions page 35

SmartStart
The SmartStart function lets you de-
fine a time period during which your
washing machine will start automati-
cally based on an external signal. The
start takes place via a signal, e.g.,
from your energy supplier, that indi-
cates that the electricity rate is partic-
ularly economical. Please check with
your local utility provider for availabil-
ity.
This function is active when the 
SmartGrid programmable function is
switched on.
The time period can be defined be-
tween 30 minutes and 24 hours. During
this period, the washing machine waits
for the external signal. If no signal is
sent during the defined period, the
washing machine starts the wash pro-
gram.
 Delay start/SmartStart
Setting the time period
If the  SmartGrid programmable
function is activated, the function of
the  sensor button changes. The
time display no longer shows the de-
lay-start period, and instead shows
the time period in which your washing
machine can be started automatically
(see "Programmable functions –
 SmartGrid").
The procedure for setting this is the
same as for setting the time for Delay
Start.
 Touch the  sensor button.
 Set the time period you want using
the  or  sensor buttons.
 Touch the Start/Add laundry sensor
button.
 appears on the time display.
35