Starting A Program; Adding Laundry During A Program Sequence (Addload) - Miele WWD 660 WCS Operating And Installation Instructions

6. Starting a program

Starting a program
 Touch the flashing Start/Add laundry
sensor button.
The door will lock and the wash pro-
gram will start.
If a delay-start period has been se-
lected, this counts down on the time
display. At the end of the delay-start
period or immediately after the program
has started, the program duration will
appear on the time display.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor button
flashes.
You can reactivate the indicators:
 Touch the Start/Add laundry sensor
button (this does not have any effect
on a program that is running).
30
Adding laundry during a pro-
gram sequence (AddLoad)
Laundry can be added or removed at
any time, provided that the  symbol
is not illuminated on the control field.
 Touch the Start/Add laundry sensor
button.
Rotating bars  ...  ...  are
shown in the time display.
If the word  appears on the time dis-
play, the door can be opened.
 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Add laundry sensor
button.
The wash program will continue.
Laundry cannot usually be added or re-
moved if:
- The suds temperature is above 130°F
(55°C).
- The water inside the drum is above a
certain level.