Miele WWD 660 WCS Operating And Installation Instructions page 33

Final spin speed in wash pro-
gram
When a program is selected, the sensor
button for the optimum spin speed for
that program will be brightly lit up on
the control field.
A faster spin speed can be selected for
certain wash programs.
The highest selectable spin speed is in-
dicated in the table.
Omitting the final spin (Rinse hold)
 Touch the  sensor button (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the laun-
dry is not going to be removed from the
drum immediately after the end of the
program.
Ending a program with a spin cycle
The sensor button for the optimum spin
speed lights up on the control field. You
can change the spin speed.
 Touch the Start/Add laundry sensor
button.
Ending a program without a spin cy-
cle
 Reduce the spin speed to .
 Touch the Start/Add laundry sensor
button.
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the interim spin speed as
appropriate.
Deselecting the rinse-spin and final
spin
 Touch the  sensor button.
After the last rinse cycle, the water will
be pumped away and the Anti-crease
phase will switch on.
An Extra Rinse cycle is carried out with
this setting for certain wash programs.
Spin cycle
33