JVC CL-R190 Instruction Manual page 32

ICON ITEMS
IMAGE
*2
ADJUST
i
i
INFORMATION
i
LANGUAGE
English
Functions and description
Make Automatic adjustment according to the
state of the video signal.
Adjusting items are as follows.
AUTO ADJUST -Screen Position.
-Contrast
-Black Level.
-RGB Gain
Adjust the horizontal screen position of the
HORIZONTAL display area.
POSITION Adjustable range is from 0 to 100:
Default setting is 50
Adjust the vertical screen position of the display
VERTICAL area.
POSITION Adjustable range is from 0 to 100:
Default setting is 50
Adjust the horizontal dot pitch for the analog vide
signal.
CLOCK
Adjustable range is from 0 to 100:
Default setting is 50
Adjust the dot clock phase to minimize the flicker,
smear and noise.
PHASE
Adjustable range is from 0 to 100:
Default setting is 50.
EXIT:
Exit from the image adjust sub-menu.
Display the monitor information listed below.
1. MODEL: List the Model name.
2. S/N: List the Monitor serial number.
3. COLOR MODE: List the current COLOR MODE setting.
4. RESOLUTION:Display the receiving signal Resolution.
5. H.FREQUENCY:List Horizontal frequency.
6. V.FREQUENCY:List Vertical frequency.
7. OPERATION HOURS:
Display the Backlight Operation Hours in (Hours)
Note: Only cumulated active Backlight working hours. Does not
cumulate the power saving hours.
8. FIRMWARE VER:List the monitor Firmware version.
ENGLISH
Set the OSD Language to English.
DEUTSCH
Set the OSD Language to Germany.
日本語
Set the OSD Language to Japanese.
EXIT
Exit from the Language sub-menu.
- 32 -
OSD Menu table-2