JVC CL-R190 Instruction Manual page 21

⑦:
LED Indicator
LED indicates the monitor status described below table.
No. LED
1 Off
2 Green
3 Orange
⑧ :
USB
USB input port.
Connect the USB cable to the host PC for the calibration or QA test purpose.
⑨ :
DVI
DVI, TMDS digital input connector.
Connect the DVI connector.
⑩ :
DP
DisplayPort, Digital 400mV(p-p) input connector.
Connect the DisplayPort connector.
⑪ :
VGA
VGA:D-SUB 15pins analog input connector.
Connect the VGA cable.
⑫ :
Power
DC Power input.
DC JACK: DC12V input.
Connect the DC output from attached AC adapter.
Power
Off Power off
On Power on
On Power management on
⑨ ⑩
⑧
- 21 -
Mode
⑪ ⑫
English