JVC CL-R190 Instruction Manual page 15

Warning
Do not disassemble, repair, or alter the monitor. It could cause fire, electric
shock, or injury. Servicing of such a monitor may be refused. Or a fee may
be charged even within the warranty period. Ask your dealer for repairs.
Do not continue using the monitor when failure or abnormality is found. It
could cause fire or electric shock.
Do not touch or swallow the liquid crystal that may leak from the damaged
panel. It could cause skin irritation. If it gets into the eye, flush the eye with
water and call your doctor. If it adheres to skin or clothes, wash it off
immediately with water. It contains a stimulating substance.
Do not put anything on top of or over the monitor and the AC adapter. It
could cause the monitor to fail or cause fire.
Do not put anything over the cables. It could cause the monitor to fail or
cause fire.
Do not handle the monitor with wet hands. It could cause the monitor to fail
or cause electric shock.
If smoke or odor is observed, turn off and unplug the monitor immediately.
Continual use could cause fire or electric shock. Consult your dealer.
If by accident you drop the monitor or give it a jolt, turn off and unplug the
monitor immediately. Continual use could cause fire or electric shock.
Consult your dealer.
If liquid or any foreign object enters inside, turn off and unplug the monitor
immediately. Continual use could cause fire or electric shock. Consult your
dealer.
To avoid a lighting strike, stop using the monitor during thunder. It could
result in electric shock.
Make sure to use the supplied power cable and the AC adapter. The use of
a cable and/or an AC adapter other than supplied could cause the monitor to
fail.
The input voltage for this monitor is limited to AC 100 V to AC 240 V. Do not
use it at any other voltage. Failure to do so could cause the monitor to fail or
cause fire.
The monitor must be grounded. Failure to do so could cause electric shock.
When using a 2P plug, ground the monitor before plugging into a wall outlet.
To remove the grounding cable, unplug the monitor first.
English
- 15 -