Set Port Priority - Panasonic PN261693D Manual

4.2.3.

Set Port Priority

Press O (command) on the Trunk Configuration menu, and then you can see "Set
Port Priority" as Figure 4-10. You can implement the priority configuration for
trunking on this screen.
PN262492 Local Management System
Trunk Configuration Menu -> Set Port Priority
System Priority
System ID
Port Priority
----- ----------
1 32768
2 32768
3 32768
4 32768
5 32768
6 32768
7 32768
8 32768
9 32768
10 32768
-------------------------------- <COMMAND> -----------------------------------
[S]et Port Priority
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
System Priority This is the priority level of the device, which is necessary for configuring the trunk-
ing on the network with LACP. The lower numeric value is, the higher priority
level will be. The factory default settings is one (1).
System ID This is an ID of the device, which is necessary for configuring trunking on the net-
work with LACP. This becomes the ID of a MAC address of this device, and can-
not be changed. A combination of the value of system priority and the system ID
becomes the system ID on LACP.
Port Indicates the port-number of the device.
Priority This is the priority level per port of the device on trunking. The lower numeric
value is, the higher the priority will be. This becomes enabled when the configura-
tion of a trunking group, which is more than nine (9) ports. All of the factory
default settings are set to one (1).
The following describes how to use several commands on this screen.
S Configures the priority value (priority level) per port.
Press S (command), and then the appearance of the command prompt becomes "Enter
port-number.>". Enter the port-number to be configured. After that, the appearance of the
command prompt becomes "Enter port priority". Enter the priority value in the range
from 0 to 255.
Q Returns to the top menu.
: 32768
: 00:00:00:00:00:01
Figure 4-10: Set Port Priority
87