Pps Neighbor Table - Panasonic PN261693D Manual

4.12.4. PPS Neighbor Table

Press G (command) on the PPS Configuration screen to see PPS Neighbor Table as
Figure 4-56 below. You can refer to and configure the PPS neighbor table on this
screen.
PNxxxxxx Local Management System
PPS Configuration -> PPS Neighbor Table
Neighbor Age-Out Time: 60 seconds
Total Entries: 2
MAC Address
----------------- ---- -------
xx:xx:xx:xx:xx:xx 10
xx:xx:xx:xx:xx:xx 2
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set Neighbor Age-Out [T]ime
Command>
Enter the character in square brackets to select option
Screen Description
Neighbor Displays the holding (or retention) time for PPS Neighbor entry. Entries without the
communication, which exceeds the storing time configured, are deleted from the table. The
Age-Out Time
factory default settings is 60 seconds.
Total Entries Displays the number of entries regarding the PPS Neighbor.
MAC Address Displays the MAC address of the PPS Neighbor.
Port Displays the port-number to be used for the communication with the PPS Neighbor.
Expired Describes the time needed to delete the entry registered in the Neighbor table.
Port Expired
52
57
Figure 4-56 A: PPS Neighbor Table
168
[D]elete PPS Neighbor Entry
[S]how Neighbor Info Detail
[Q]uit to previous menu