Table of Contents
Advertisement
2.6. Save Configuration to Flash
Press F on Main Menu to see Save Configuration to Flash, as Figure 2-8 below.
Select this command to save the content, which is configured on your device, into
the built-in memory. The appearance of the command prompt becomes "Save
current configuration?(Y/N)" on this screen. Press Y to save it, and N otherwise. If
you do not save the configuration on this screen, the content configured is deleted
when restarting or powering off.
PNxxxxxx Local Management System
Main Menu -> Save Configuration to Flash
Save current configuration? (Y/N)>
Y for Yes; N for No
Figure 2-8 A: Save Configuration to Flash
16
Advertisement
Table of Contents
