Snmp Management Configuration - Panasonic PN261693D Manual

3.2.1.

SNMP Management Configuration

Press M (command) on the SNMP Configuration menu, and then you can see
SNMP Management Configuration Menu as Figure 3-4 below. You can configure
the community name of an SNMP manager on this screen. See section 3.5, and
then change the configuration of an SNMP agent to enable it in advance when
configuring the community name of the SNMP manager. See section 3.2.2 when
designating a host IP address of the SNMP manager.
PNxxxxxx Local Management System
SNMP Configuration -> SNMP Management Configuration Menu
SNMP Manager List:
No. Status
---- --------
1 Enabled
2 Enabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Manager [S]tatus
Set Manager [C]ommunity
Command>
Enter the character in square brackets to select option
Screen Description
SNMP Displays the configuration of the SNMP manager, which is configured currently.
Manager List
No.
Status
Privilege
Community
Privilege Community
----------- ----------------------------
Read-Write private
Read-Only public
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Read-Only
Set Manager P[r]ivilege
[Q]uit to previous menu
Figure 3-4: SNMP Management Configuration
Displays the entry number of a destination of sending traps.
Displays the status of SNMP manager.
Enable
Disable
Displays an access authorization of SNMP manager.
Read-Write
Read-Only
Displays the community name, which is configured currently.
Indicates that SNMP manager is enabled.
Indicates that SNMP manager is disabled.
Allows you to read and write.
Allows you to read, only.
24