Neighbor Table - Panasonic PN261693D Manual

3.9.1.

Neighbor Table

Press E (command) on the screen of the LLDP Configuration, and then you can see
"Neighbor Table" as Figure 3-25. You can display the Neighbor table on this
screen.
PNxxxxxx Local Management System
LLDP Configuration -> Neighbor Table
Total Neighbors:
No Chassis ID
--- ----------------- ----------------- --------------- ----
1 xx:xx:xx:xx:xx:xx xx:xx:xx:xx:xx:xx
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Total Neighbors Displays the number of entries recorded on the Neighbor table.
No Displays the entry number.
Chassis ID Displays Chassis ID per entry.
Port ID Displays the port ID per entry.
Mgmt IP Address Displays the IP address per entry.
Port Displays the port-number, which received the LLDP frames.
The following describes how to use several commands on this screen.
N Displays the next page.
Press N (command) to display the next page.
P Displays the previous page.
Press P to display the previous page.
D Displays the details on each entry.
Press D, and then the entry details are displayed. See next section (3.9.3) for this configura-
tion.
Q Returns to the top menu.
0
Port ID
[D]etail
[Q]uit to previous menu
Figure 3-25: Neighbor Table
63
Mgmt IP Address Port
0.0.0.0 1