Table of Contents
Advertisement
4.5.3.
Scheduling Method
Press C (command) on the Traffic Class Configuration menu, and then you can see
"Scheduling Method" as Figure 4-28. You can configure the scheduling method
on this screen.
PNxxxxxx Local Management System
Quality of Service Configuration -> Scheduling Method
Selected port-number : 1
Scheduling Method: Weighted Round Robin
QID Weights
--- -------
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
-------------------------------- <COMMAND> -----------------------------------
[S]et Scheduling Method
Set Traffic Class-Weight [M]apping
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Selected port-number
Scheduling Method
QID
Wights
The following describes how to use several commands on this screen.
S
Selects QOS scheduling method.
Press S (command), and then the appearance of the command prompt becomes "Select
scheduling method >". Press 1 for using Strict Priority Queueing, 2 for Weighted Round
Robin, 3 for Weighted Deficit Round Robin, and 4 for Round Robin.
M Configures the specific gravity on a priority (Traffic Class).
1. Press M, and then the appearance of the command becomes "Enter queue ID >".
Enter the number of strict priority queue
2. The appearance of the command prompt becomes "Enter weight for queue ID #>".
Then enter weight using the value between 0 and 127.
Figure 4-28: Scheduling Method
Enter a selected port-number.
Displays a scheduling method of the QoS function.
Strict
PQ: Strict priority scheduling.
Weighted
WRR： Weighted round robin scheduling
Round Robin
Displays the priority of packets.
Displays the specific weight for distributing (or sorting) packets.
111
(
)
strict priority
in the range from 1 to 7.
Advertisement
Table of Contents
