Trunk Vlan Configuration Menu - Panasonic PN261693D Manual

4.1.6.

Trunk VLAN Configuration Menu

Press T (command) on the VLAN Management menu, and then you can see Trunk
VLAN Configuration Menu as Figure 4-7. You can configure Trunk VLAN per port
on this screen.
PNxxxxxx Local Management System
VLAN Management -> Trunk VLAN Configuration Menu
Port Trunking Native VLAN Trunking VLANs
---- -------------------- ------------------- ------------------- --------
1 1
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Port Displays the port-number.
Trunking Native Displays a native VLAN ID of a port.
VLAN
Trunking VLANs Displays the VLAN ID, which is added to a port.
(Inactive) Displays the VLAN ID, which does not belong to a port.
GVRP Displays the status of GVRP.
Disabled
Enabled
1
Native [V]LAN
[R]emove Allowed VLAN
Set [G]VRP Status
Figure 4-7: Trunk VLAN Configuration Menu
GVRP is disabled (factory default settings).
GVRP is enabled.
(Inactive)
2-4094
[A]dd Allowed VLAN
[E]xcept Allowed VLAN
80
GVRP
Disabled