Table of Contents
Advertisement
6.5.1.
IPv4 Ping Execution
Press 4 on Ping Execution to see the IPv4 Ping Execution, as Figure 6-8 below. This
screen allows you to confirm the communication flowing to a terminal and other
devices connected, by executing the IPv4 Ping command on your switch.
PNxxxxxx Local Management System
Ping Execution -> IPv4 Ping Execution
Target IP Address:
Number of Requests:
Timeout Value:
=============== Result ===================
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address
Set [N]umber of Requests
Set [T]imeout Value
Command>
Enter the character in square brackets to select option
Screen Description
Target IP Address
Number of Requests
Timeout Value
Result
0.0.0.0
10
3 Sec.
[E]xecute Ping
[S]top Ping
[Q]uit to previous menu
Figure 6-8 A: IPv4 Ping Execution
The IP address of the opponent-destination, which executes Ping, is dis-
played. The factory default settings is 0.0.0.0.
The number of Ping executions is displayed. The factory default settings is 10
times.
Displays the necessary time until a time-out occurs. The factory default
settings is three (3) seconds.
Displays the Ping result.
188
Advertisement
Table of Contents
