Configure Stp; Figure 44 Spanning Tree Protocol: Configuration; Table 23 Spanning Tree Protocol: Configuration - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide
Table 22 Spanning Tree Protocol: Status (continued)
LABEL
Poll Interval(s)
Stop

11.3 Configure STP

To configure STP, click the Configuration link in the Spanning Tree Protocol screen as
shown next.

Figure 44 Spanning Tree Protocol: Configuration

The following table describes the labels in this screen.

Table 23 Spanning Tree Protocol: Configuration

LABEL
Status
Active
98
DESCRIPTION
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to halt STP statistic polling.
DESCRIPTION
Click Status to display the Spanning Tree Protocol Status screen (see
on page 97).
Select this check box to activate STP. Clear this checkbox to disable STP.
Chapter 11 Spanning Tree Protocol
Figure 43