Interface Route-Domain Commands - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

Table 85 interface port-channel Commands (continued)
COMMAND
qos priority
spanning-tree
speed-duplex
spq
test
vlan-trunking
wfq

37.9.5 interface route-domain Commands

The following table lists the
Chapter 37 Introducing the Commands
<0 .. 7>
path-cost <1-
65535>
priority <0-255>
<auto|10-half|10-
full|100-half
|100-full|1000-
full>
<wt0> <wt1> <wt2>
<wt3>
interface route-domain
ES-4024A User's Guide
DESCRIPTION
Sets the quality of service
priority for an interface.
Enables STP on the port(s).
Sets the STP path cost for the
specified port(s).
Sets the priority for the specified
port(s).
Sets the duplex mode (
full ) and speed ( 10
1000 Mbps) of the connection
on the interface. Selecting
auto (auto-negotiation) makes
one port able to negotiate with a
peer automatically to obtain the
connection speed and duplex
mode that both ends support.
Sets the port(s) to use Strict
Priority Queuing.
Performs an interface loopback
test.
Enables VLAN Trunking on
ports connected to other
switches or routers (but not
ports directly connected to end
users) to allow frames
belonging to unknown VLAN
groups to pass through the
switch.
Sets the port(s) to use Weighted
Fair Queuing (WFQ).
Sets the interface to use WFQ.
A weight value of one to eight is
given to each variable from
to wt3 .
commands in configuration mode.
half or
, 100 or
wt1
225