Settings Tab - Ricoh Ri 4000 User Manual

1. Before You Begin

Settings Tab

1.
[INK PATH CONTROL]
Performs the ink path control. If you press this button, you can flush the printer. For details, see page
224, "Ink Path Guide".
2.
[OPTION]
You can change the following settings via the Option screen.
Setting
[IP ADDRESS]
[DRYING TIME]
[HEIGHT SETTING]
[FACTORY RESET]
[TEMPERATURE]
Set print IP address.
Specify the drying wait time.
To specify the drying time between enhancer printing and ink
printing, enter the number of seconds in [DRY TIME] in [En ->
Ink]. To specify the drying time between printing in white and
printing in color, enter the number of seconds in [White -> Color],
and to specify the drying time between printing in color and
printing in white, and enter the number of seconds in [Color ->
White].
If [DRY TIME BASED ON JOB DATA] is checked, [DRY TIME] is
not displayed because the setting specified on the ColorGATE
Productionserver takes precedence.
Set the gap between the print head and the platen for HEIGHT
ADJUSTMENT.
When set to "Normal", the gap is narrowed and the image quality
is improved, but the detection for the unevenness of the garment
is more sensitive. The gap becomes wider in the order of "rough"
and "very rough", and the image quality deteriorates, but the
detection for the unevenness of the garment becomes less
sensitive.
Set Head, Table, and print alignment to original settings.
Can display temperature in Celsius or Fahrenheit.
45
RICOH Ri 4000 User Manual
Description