Ricoh Ri 4000 User Manual page 83

1. Before You Begin
Parameter
Scale 1:1
Proportional
Height/Width:
Fit to Page
Scale (%):
Rotate:
Offset x/y:
Horizontal Alignment
Vertical Alignment
If "Job placement panel" is checked in Media Preview, you can also change the position and size
of the image by drag and drop it.
If you want to print the job with no scaling.
If you want to retain the proportions of the job when entering the height
or width.
Enter the required values.
Fit Single Copy to Page: Activate this option if you want to adjust your
individual job to the format set on the Printer tab or the size entered
there.
Fit All to Page: Activate this option if you want to adjust your job with
multiple output or a multi-page job to the format set on the Printer tab or
the size entered there. This works only with sheet paper.
Fit Single Copy to Page (reduce only): Activate this option if you want to
reduce your individual job to the format set on the Printer tab or the size
entered there.
Fill Single Copy to Page: The Feature sizes the graphic to fit the entire
page without unproportional scaling. If the graphic is then over the
edges of the media the rest is cropped.
Enter the required scaling value here in percent.
0°- 270°: Here you have the option of specifying any rotation of the job
required.
Auto: The job is rotated so that it is automatically positioned to save as
much space on the media as possible.
Enable this function if you want to center your print image on the media
horizontally (x) or vertically (y).
Enter the required values. The point of origin is in the left upper corner.
The job will be shifted with the entered distance.
Specify you to select the Offset x position.
Left/Center/Right: Specifies where to move the image relative to the
media.
Reset: Specify 0
Specify you to select the Offset y position.
Top/Center/Bottom: Specifies where to move the image relative to the
media.
Reset: Specify 0
83
RICOH Ri 4000 User Manual
Description