Ricoh Ri 4000 User Manual page 86

1. Before You Begin RICOH Ri 4000 User Manual
Note – When printing image data containing multiple sets of print data for enhancer printing, white
color printing, and color printing, the wait time for drying is executed after each type of printing
is completed.
For example, in [Layers:], you can specify the enhancer printing, white color printing, and color
printing in this order, and specify 15 seconds for the enhancer printing, 10 seconds for the white
color printing, and 5 seconds for the color printing drying times. If the print image data contains
2 sets of print data for enhancer printing, 2 sets of print data for white color printing, and 1 set of
print data for color printing, the operation proceeds in the following order: enhancer printing is
executed twice followed by a drying time of 15 seconds, white color printing is executed twice
followed by a drying time of 10 seconds, and color printing is executed once followed by a
drying time of 5 seconds.
For information on the layer function, see page 87 "Specifying the Layer Function".
86