Ricoh Ri 4000 User Manual page 73

1. Before You Begin
Set the Limit value.
Click [OK].
NOTE –
This setting will increase the consumption of white ink.

If ink bleeding occurs, adjust the drying time on the printer. For details, see page 45,

"[DRYING TIME]" in Settings Tab. Or adjust the drying time on the ColorGATE
Productionserver. For details, see page 85, "Specifying the Drying Time after Printing".
When returning the white print mode to [White: 600x1200 8pass BiDir 2bit], also return the

Limit value to the original value.
By selecting [Filling] in [White2 (Highlight):], you can increase the amount of white ink used

as the undercoat to increase the whiteness.
73
RICOH Ri 4000 User Manual