Kyocera 7056i Operation Manual page 210

Operation on the Machine > Loading Paper in the Multipurpose Tray
4
Loading Envelopes or Cardstock in the Multipurpose Tray
Load the paper with the print side facing down. For the procedure for printing, refer to the following:
Printing System Driver User Guide
Example: When printing the address.
1
IMPORTANT
• Use unfolded Oufuku hagaki (Return postcard).
• How to load envelopes (orientation and facing) will differ depending on the type of envelope. Be sure to
load it in correctly, otherwise printing may be done in the wrong direction or on the wrong face.
NOTE
When you load envelopes in the multipurpose tray, select the envelope type by referring to the following:
Cassette/MP Tray Settings (page 8-7)
IMPORTANT
• When loading the paper, keep the print side facing down.
• Curled paper must be uncurled before use.
• When loading paper into the multipurpose tray, check that there is no paper left
over in the tray from a previous job before loading the paper. If there is just a small
amount of paper left over in the multipurpose tray and you want to add more, first
remove the left-over paper from the tray and include it with the new paper before
loading the paper back into the tray.
• If there is a gap between the paper and the paper width guides, readjust the guides
to fit the paper in order to prevent skewed feeding and paper jams.
• Ensure that the loaded paper does not exceed the load limits.
Specify the type of paper loaded in the multipurpose tray using
the operation panel.
MP Tray Setting (page 8-8)
2 3
1 Oufuku hagaki (Return postcard)
2 Hagaki (Cardstocks)
3 Portrait form envelopes (Open the flap)
4 Landscape form envelopes (Close the
flap)
4
5-7