Accessing Embedded Web Server Rx - Kyocera 7056i Operation Manual

Installing and Setting up the Machine > Embedded Web Server RX

Accessing Embedded Web Server RX

1
2
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Wired Network]
Examples: https://10.180.81.3/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX
as well as their current status.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate.
Embedded Web Server RX User Guide
You can also continue the operation without configuring the certificate.
Configure the function.
Select a category from the navigation bar on the left of the screen.
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name
and Password and click [Login]. Entering the predefined administrator password allows the
user to access all pages, including Document Box, Address Book, and Settings on the
navigation menu. The factory default setting for the default user with administrator privileges
is shown below. (Upper case and lower case letters are distinguished (case sensitive).)
Login User Name: Admin
Login Password: Admin
2-64