Printing Documents In Custom Box - Kyocera 7056i Operation Manual

Operation on the Machine > Using Document Boxes

Printing Documents in Custom Box

1
2
Display the screen.
1
[Home] key > [Custom Box]
2
Select the box containing the document you want to print.
NOTE
If a custom box is protected by a password, enter the correct password.
3
Select [Open].
Print the document.
1
Select the document in the list that you want to print by selecting the checkbox.
The document is marked with a checkmark.
NOTE
To deselect, select the checkbox again and remove the checkmark.
2
Select [Print].
3
Set the paper selection, duplex printing, etc., as desired.
For the features that can be selected, refer to the following:
Custom Box (Store File, Printing, Send) (page 6-8)
NOTE
Select the [Program] tab when registering or recalling programs.
Registering Programs (page 5-10)
Recalling Programs (page 5-10)
If a document stored from a computer is selected, the print settings selection screen
appears.
• To use the settings used at the time of printing (when the document was saved), select
[Print As Is]. Select [Start Print] to start printing.
• To change the print settings, select [Print after Change Settings] and change the print
settings.
After a document saved in the machine is selected, the [Use File Settings] key may
appear in the setting screen for the feature to be used.
• To use the settings saved with the document, select [Use File Settings].
• If you need to change the print settings, select [Print after Change Settings].
4
Press the [Start] key.
Printing of the selected document begins.
5-55