Remove The Type-C Bracket; Remove The Touchpad Board Mylar And The Touchpad Board Cable; Make Sure The Following Frus (Crus) Have Been Removed; Remove The Lower Case - Lenovo Yoga Pro 9i Maintenance Manual

Hide thumbs Also See for Yoga Pro 9i:
Table of Contents

Advertisement

Remove the Type-C bracket

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove two screws and then remove the Type-C bracket.
Figure 8. Remove the Type-C bracket
Screw specifications
M2 x L2.8
Go to
https://support.lenovo.com/partslookup
replacement parts:
Type-C bracket

Remove the touchpad board mylar and the touchpad board cable

Make sure the following FRUs (CRUs) have been removed.

"Remove the lower case" on page 28
"Remove the battery pack" on page 29
Step 1.
Remove the touchpad board mylar.
Number of screws
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
31

Advertisement

Table of Contents
loading

Table of Contents