Remove The Fingerprint Board Module - Lenovo Flex 7 Hardware Maintenance Manual

Figure 16. Remove the I/O board cable
Go to
https://support.lenovo.com/partslookup
part:
I/O board cable

Remove the fingerprint board module

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
Step 1. Remove one screw then remove the fingerprint board bracket.
Figure 17. Remove the fingerprint board bracket
Screw specifications
M2 x L2
Step 2. Disconnect the fingerprint board cable from the fingerprint board and system board. Remove the
fingerprint board cable.
38
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
Number of screws
1