Mitsubishi FR-E500 Series Instruction Manual page 98

< Setting>
Pr. 60 Operation
Setting Mode
Ordinary
0 operation
mode
Shortest
1, 2, 11, acceleration/
12 deceleration
mode
<Setting 2>
! Set these parameters to improve performance in the intelligent mode.
(1) Pr. 61 "reference I for intelligent mode"
Setting
9999 (factory setting)
0 to 500A
(2) Pr. 62 "ref. I for intelligent mode accel"
The reference current setting can be changed.
Setting
9999 (factory setting)
0 to 200%
(3) Pr. 63 "ref. I for intelligent mode decel"
The reference current setting can be changed.
Setting
9999 (factory setting)
0 to 200%
Note: Pr. 61 to Pr. 63 are only valid when any of "1, 2, 11, 12" are selected for
Pr. 60.
Description

Set to accelerate/decelerate the motor in the
shortest time.
The inverter makes acceleration/deceleration in
the shortest time using its full capabilities. During
deceleration, an insufficient brake capability may
cause the regenerative overvoltage alarm
(E.OV3).
"1" : Stall prevention operation level 150%
"2" : Stall prevention operation level 180%
"11": Stall prevention operation level 150%
when brake resistor or brake unit is used
"12": Stall prevention operation level 180%
when brake resistor or brake unit is used
Referenced from rated inverter current
Referenced from setting (rated motor current)
150% (180%) is the limit value.
The setting of 0 to 200% is the limit value.
150% (180%) is the limit value.
The setting of 0 to 200% is the limit value.
83
Get other manuals https://www.bkmanuals.com
Reference Current
Reference Current
Reference Current
PARAMETERS
Automatically
Set
Parameters

Pr. 7, Pr. 8