Mitsubishi FR-E500 Series Instruction Manual page 36

Pin No.
1
2
3
4
5
6
DeviceNet has a voltage specification of 24VDC for communication and an input
voltage specification of 11VDC to 25VDC for communication to each device. A 5V
drop in the system is stipulated for each power supply wire (V+, V-).
Note: Use only pins 1 to 5.
The DeviceNet connector of the inverter has a 6-pin socket, but do not connect
6 pins.
Pin Out/Functions
Color Name
Red V+ Power cable positive end (V+)
White CAN+ Communication data high side (CAN H)
Bare SHLD Drain
Blue CAN- Communication data low side (CAN L)
Black V- Power cable negative end (V-)
— —
23
Get other manuals https://www.bkmanuals.com
INSTALLATION AND WIRING
Signal Type
—